MX-1 HOB
The resistance for the wear and the chipping get elevated to the next level.
Characteristics
It combines the toughness of Powder HSS and the wear resistance of Dissolution HSS.
Cutting result
【Workpiece Dimensions】
- Module 2.25
- PA 17.5°
- NT 46
- HA 23°
- Material SCM415
【Hob Dimensions】
- 3 starts 16 flutes
- MACH7 (HSS) / NEW MATERIAL MX-1
- SuperDryIII PVD
(Coat on the cutting face and flank)
【Cutting Conditions】
- Dry cut
- Cutting speed 250m/min
- Axial feed 2.4mm/rev
- Climb cut
- Cutting length 80m (No shift)
