GRAESSNER (Right angle gear box)
POWER GEAR Mini
Company：NIDEC DRIVE TECHNOLOGY CORPORATION
Precision right-angle reducer
Manufactured by Germany Nidec Graessner
Features: the miniature of POWER GEAR. right-angle shaft, small, low reduction ratio
Product's data
Basic information
Size | P27,P33,P45 |
|---|---|
Reduction ratio | P27:1-1.5 / P33:1-4 / P45:1-4 Single stage reduction with bevel gears |
Nominal output torque | 2.2 ～ 16Nm |
Maximum output torque ＊1 | 3.3 ～ 25Nm |
Emergency stop torque ＊2 | 4.4 ～ 32Nm |
Maximum input speed | 7500rpm |
Standard backlash ＊3 | 18 arc-min or less |
Allowable radial load (output) ＊4 | 150 ～ 400N |
Allowable axial load (output) ＊5 | 75 ～ 200N |
Mounting direction | There is a specification. |
Output shaft form | Solid shaft, dual shaft, hollow shaft (only when install a shrink disc) |
＊1 | Please contact us when the cycles exceed 1000 cycles per hour. |
＊2 | Max.1000 times during the service life of the gearbox |
＊3 | At the output, at 2% load |
＊4 | When acting on the center of shaft at output speed 400 min-1 |
＊5 | When acting on the axis of shaft at output speed 400 min-1 |
Size | P27,P33,P45 | Reduction ratio | P27:1-1.5 / P33:1-4 / P45:1-4 Single stage reduction with bevel gears |
|---|---|---|---|
Nominal output torque | 2.2 ～ 16Nm | Maximum output torque ＊1 | 3.3 ～ 25Nm |
Emergency stop torque ＊2 | 4.4 ～ 32Nm | Maximum input speed | 7500rpm |
Standard backlash ＊3 | 18 arc-min or less | Allowable radial load (output) ＊4 | 150 ～ 400N |
Allowable axial load (output) ＊5 | 75 ～ 200N | Mounting direction | There is a specification. |
Output shaft form | Solid shaft, dual shaft, hollow shaft (only when install a shrink disc) | ＊1 | Please contact us when the cycles exceed 1000 cycles per hour. |
＊2 | Max.1000 times during the service life of the gearbox | ＊3 | At the output, at 2% load |
＊4 | When acting on the center of shaft at output speed 400 min-1 | ＊5 | When acting on the axis of shaft at output speed 400 min-1 |
