Horizontal Machining Center
Table-fixed model HPM40
Company：NIDEC OKK CORPORATION
Target: Zero down time
This model's armless ATC and the chip pocket at the center of the bed enable HPM40 to mass produce units stably. In addition, an axial center cooling function is used for HPM40's axis ball screws.
Product's data
Basic information
Axial travel distance（X/Y/Z) | 600x600x500mm |
|---|---|
Table work surface area | φ400mm |
Maximum weight of workpiece loadable on the table | 600kg |
Rapid traverse rate | 50m/min |
Spindle rotating speed | 12000min-1 |
Spindle taper hole | No. 40 |
Nomber of storable tools | 24 (OP：40) |
Axial travel distance（X/Y/Z) | 600x600x500mm | Table work surface area | φ400mm |
|---|---|---|---|
Maximum weight of workpiece loadable on the table | 600kg | Rapid traverse rate | 50m/min |
Spindle rotating speed | 12000min-1 | Spindle taper hole | No. 40 |
Nomber of storable tools | 24 (OP：40) |
The product's features
Armless ATC
This product adopts an armless ATC, a reliable component with few movable sections.
Chip outlet
This machine, which adopts a center trough structure, collects chips from immediately below its spindle.
Type A & B
Two types are available: Type A, which works with a gantry loader; and Type B, a compact and narrow model.
Contact information for product inquiry
Nidec OKK Corporation
